SE Racing PK Ripper frame and Landing Gear forks. This is an alloy 20 inch loop tail BMX frame with floval tubing. Finished in raw aluminium and with a ball burnished finished although it has also been polished. The black marks around the welds are the remainder of the polishing compounds and not black paint. At least with this frame you can see all the marks and nothing is hidden under paint or powder.
Usual marks and scrapes for a frame of this age. With a bit of work and some we and dry paper, many of these could be removed. I don’t have the patience at the moment. There is a small crack at the end of the slot in the seat post tube. Not an uncommon problem with these frame. The area behind the bottom bracket doesn’t have any cranks.
Dropouts have washer marks and there is a bit of chain rub on the right side.
Landing Gear forks have been re-chromed. Dropouts are in good condition, as are the steerer tube threads.
Serial number on the frame is PK64041.
The PK Ripper sticker on the down tube is a cheap reproduction and really should be removed.
Scroll down for more photos.